Brass Nickel Plated Ball Valves

Quality:

• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Travel stops on body to avoid stresses at stem

Body:

• Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications

Threads:

• ISO 228 parallel female by female threads

Flow:

• Full port to DIN 3357 for maximum flow

Seals:

• Pure PTFE self-lubricating seats with flexible-lip design

Stem:

• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety

Options:

• Stem extension
• T-handle
• AISI 430 stainless steel handle
• Patented locking device
• Dezincification resistant brass body and components
• Oval lockable handle up to 2", round over 2"
• Male by Female threads
• Male by male threads

Working Pressure:

• 40 Bar (600 PSI) up to 2", 30 Bar (450 PSI) over 2"
• non-shock cold working pressure

Upon Request:

• AISI 316 stainless steel ball and/or stem
• Glass filled PTFE ball seals
• Custom Design

Handle:

• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• Working Temperature: -40°C (-40°F) / +170°C (+350°F)
• Warning: freezing of the fluid in the installation may severely damage the valve
• Geomet® Specifications

PED Directives:

• According to 97/23 CE module A: it cannot be used with dangerous gases in sizes larger than 25mm

Approved by or in compliance with:

• Danish Board of European Technical Approval for Construction Products
• VA Approval (Danmark)
• Water Regulation Advisor Scheme (United Kingdom)
• GOST-R (Russia)
• Rostek (Russia)
• Hygenic (Russia)
• UkrSepro (Ukraine)
• RoHS Compliant
• NOTE: Approvals apply to specific configurations only

 Parts

Part Description		Quantity	Material
1	Nickel plated body	1	CW617N
2	Seat	2	PTFE
3	Chrome plated ball	1	CW617N
4	Nickel plated end cap	1	CW617N
5	Nickel plated stem O-Ring design	1	CW617N
6	Geomet nut	1	CB4FF
7	O-Ring	2	FPM
8	Red PVC coated geomet steel handle	1	DD11

Dimensions

Code	S90BOO	S90COO	S90DOO	S90EOO	S90FOO	S90GOO
D (inch)	1/4	3/8	1/2	3/4	1	1 1/4
DN (mm)	8	10	15	20	25	32
I (mm)	9	9	11	12	14	15
L (mm)	39	39	50	54	67	77
G (mm)	19.5	19.5	25	27	33.5	38.5
A (mm)	82	82	100	120	120	158
H (mm)	38	38	43	50	54	73
CH (mm)	20	20	25	31	38	48

Code	S90HOO	S90IOO	S90LOO	S90MOO	S90NOO
D (inch)	1 1/2	2	2 1/2	3	4
DN (mm)	40	50	65	80	100
I (mm)	17	19	22	25	29
L (mm)	90	106	136	157	191
G (mm)	45	53	68	78.5	95.5
A (mm)	158	158	255	255	255
H (mm)	79	86	132	140	154
CH (mm)	54	66	85	99	125

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration of valves over 2" is slightly different. Ask for details at our Service Center Ball valves are marked CE on handle from 1.1/4" to 2", on body over 2" as follow: OE XXCODEXX Cat I-A